One joint inductor is placed over the steel load transfer plates ensuring the joint opening exactly at that location.

The joint inductor may be manufactured on galvanized sheet steel, plastic or other material.

It is placed over the steel load transfer plates to ensure the precise location of the joint opening.

Simultaneously, due to its shape W forming two gutters prevents all liquid infiltration into the and from the base, forwarding them to the drainage system.

The "pumping" phenomenon is thus eliminated, and the base is protected against any possible infiltration of contaminants.

The joint inductor also ensures inducing the opening of the joints without any mechanical intervention, the desired location exactly half of the steel load transfer plates.

JOINTS ARE VERY THIN AND THEY ARE WATERTIGHT

THE JOINT SEAL IS TOTALLY UNECESSARY
THE JOINT MUST BE SAWN IN FRESH, ALTHOUGH SAWING JOINTS MAY BE UNECESSARY
CONSTRUCTION PRICE LOWER THAN THE TRADITIONAL TECHNIQUES